Pool Deck Remodeling in Polk County, FL
A cracked, stained or scorching-hot deck drags down the whole backyard. A new deck surface can make the pool safer, cooler underfoot and better looking.
No obligation. Phone answered 24/7.
Why pool decks wear out
A pool deck takes a beating in Central Florida. It bakes in direct sun, gets soaked by summer storms and pool splash, and carries foot traffic, furniture and sometimes a screen enclosure. Over time, concrete develops cracks, coatings fade and peel, and slabs can settle or lift. Beyond appearance, a worn deck can become a trip hazard or too hot to walk on barefoot.
Deck remodeling covers everything from recoating an existing slab to removing it entirely and installing pavers or stone. The right approach depends on the condition of the concrete underneath, your budget and how you use the space. Talk it over by calling 863-216-6735.
Common deck options
Spray-textured cool-deck coatings. Acrylic, texture-sprayed coatings such as the familiar knockdown finishes are common on Florida pool decks. They stay cooler than bare concrete, add slip resistance and cost less than replacement. They need a sound slab underneath and periodic resealing.
Stamped or decorative concrete overlays. Overlays add pattern and color on top of existing concrete, imitating stone, brick or tile. Like coatings, they depend on the base slab being stable.
Pavers. Concrete or travertine pavers are popular because individual units can be lifted and reset if the base settles or a repair is needed underneath. Pavers can sometimes be installed over existing concrete, which affects the height at doors and the pool edge, or the old slab can be removed.
Natural stone. Travertine, flagstone and other stone offer a premium look. Lighter-colored stone generally stays cooler in the sun.
Coping. The cap around the pool edge is often replaced during a deck remodel so the deck and pool edge match. Angi lists coping at about $30 to $50 per linear foot.
How much does pool deck remodeling cost?
National figures give a useful starting point, but your total depends on square footage, demolition, base repairs, material and drainage. These ranges come from HomeGuide's 2026 guides.
| Option | Typical cost per sq ft | Source |
|---|---|---|
| Basic concrete resurfacing | $3 – $6 | HomeGuide |
| Cool-deck (Kool Deck) coating | $4 – $6 | HomeGuide |
| Decorative concrete resurfacing | $6 – $12 | HomeGuide |
| Stamped concrete resurfacing | $7 – $20 | HomeGuide |
| New poured concrete patio | $5 – $15 | HomeGuide |
| New pavers | $10 – $17 | HomeGuide |
| Flagstone / natural stone | $15 – $35 | HomeGuide |
HomeGuide puts the national average for pool deck resurfacing at about $6,200, with most decks of 500 to 900 square feet running $1,500 to $10,800. Sealing adds about $1 to $3 per square foot, and leveling sunken sections can add $3 to $25 per square foot depending on the method. Angi's pool remodel guide lists a pool deck at $2,250 to $12,000.
Planning a deck for Polk County weather
- Heat. Lighter colors and cool-deck textures stay more comfortable under bare feet in summer.
- Drainage. Heavy summer rain needs somewhere to go. The deck should slope away from the pool and the house, with drains where needed.
- Slip resistance. Wet areas around steps and entries need a textured surface. Ask about sealers that keep traction.
- Settling and soil. Sandy soils, especially along the Lake Wales Ridge, and fill around older pools can settle. Ask the contractor to check for voids and sunken areas before covering them.
- Screen enclosures. If a screen enclosure sits on the deck, the footings and anchors must be considered. Removing or reworking a deck under an enclosure is a bigger job.
Permits
Polk County's Building Division FAQ lists permits as required for decks, walkways, platforms, stairs and landings, and for pavers installed within required setbacks or next to structures. Cities set their own rules inside their limits. Your contractor should confirm what applies to your address and who pulls the permit, and any HOA review should happen first.
Questions to ask before you hire
- Is my existing slab sound enough to coat or overlay, or should it come out?
- How will you handle cracks, settling and drainage?
- Will coping be replaced, and how will the deck meet the pool edge and doors?
- How will you protect the pool and screen enclosure during work?
- What sealing and maintenance will the new surface need?
- What license do you hold, and will you pull the permit? Check it with the DBPR license search.
Pool Deck Remodeling across Polk County
We connect homeowners with contractors for pool deck remodeling throughout Polk County, including:
Lakeland · Winter Haven · Bartow · Auburndale · Haines City · Davenport · Lake Wales · Mulberry · Frostproof · Lake Alfred · Fort Meade · Eagle Lake · Dundee · Polk City · Lake Hamilton · Poinciana · Four Corners · Highland City · Lakeland Highlands · Kathleen · Babson Park · Cypress Gardens
See all service areas.
Related services
Pool projects often combine several improvements. Explore: Pool Resurfacing · Pool Tile Replacement · New Pool Construction · Outdoor Living · Pool Equipment.
Pool Deck Remodeling questions
Can pavers go over my existing concrete deck?
Sometimes. Installing over concrete can save demolition costs, but it raises the deck height at doors, drains and the pool edge. The slab also has to be stable. A contractor should check before recommending it.
Which pool deck surface stays coolest?
Lighter colors and textured cool-deck coatings generally stay cooler than dark pavers or bare concrete. Many travertine pavers are also known for staying comfortable underfoot.
Should I remodel the deck and resurface the pool together?
Often it makes sense to plan them together, especially if coping is being replaced. Coordinating the order of work prevents damage to a brand-new finish.
Plan your pool deck remodeling project
Tell us about your pool and a licensed local contractor can follow up when one is available for your area. No obligation.
No obligation. Phone answered 24/7.